RigelMiner 1.17.2 updated!

[Admin]

RigelMiner 1.17.2 updated!
- Changelog -
(GRAM, CHAPA) Add sha256ton algorithm (dev fee 1%), including
ABEL+GRAM, ERG+GRAM, IRON+GRAM, HYP+GRAM, CFX+GRAM, +ZIL, see bat/sh scripts
Only icemining pool is supported at this point
--fan-contol can now be set to X to let the driver/OS manage the fan
Add --reset-oc parameter to reset all overclock settings and exit. Run as a standalone command rigel --reset-oc or rigel --reset-oc -d 0,1,....
Add --multi-device-arg-mode parameter to allow the miner to proceed even if the number of per-GPU settings doesn't match the number of GPUs - usually happens when one of the GPUs disappears from the system (taken out for maintenance, PCIE connectivity loss etc.) but the miner is run with the same config (see usage in readme).
(IRON) Remove --enable-fork support for ironfish algorithm. Use -a fishhash instead.
Remove obsolete kawpow (aipg, clore, neoxa, neurai, ravencoin) and ethash (octa, powblocks) algorithm aliases. Use -a kawpow --coin COIN and -a ethash --coin COIN instead.


https://github.com/rigelminer/rigel

[Admin]

rigel 1.15.0 updated!
- Changelog -
(IRON) Add fishhash algorithm support (dev fee 1%) including
IRON+ALPH, IRON+KLS, IRON+PYI, IRON+RXD, +ZIL, see bat/sh scripts
Add SOCKS5 proxy support (see --proxy for more info)
Add --no-colour parameter to disable colours in the miner log
Allow opting out of memory clock reset when building DAG by passing --dag-reset-mclock off
(ALPH) Password field value -p is not passed to the pool making it impossible to use static difficulty when mining to Vipor.

[Admin]

rigel 1.15.1 updated!
- Changelog -
(IRON) Add ironfish -> fishhash auto-switch.
(RVN) Report hashrate to mining pools.

[Admin]

rigel 1.16.2 updated!
- Changelog -
(GRAM) Add a kernel switch for sha256ton algorithm.
--kernel 1 (default) - best when higher power draw is not a concern
--kernel 2 - best when (very) low power draw is preferred
Tip: this version increases hashrate, however it may be less efficient than 1.16.1 with your OC - if that's the case, try reducing the locked core clock slightly, or select --kernel 2
Fix: (GRAM) Job payload parsing error when mining to Hyperpool

[Admin]

rigel 1.16.3 updated!
- Changelog -
(PYI) Minor performance improvements (~1%)
(IRON) Reduce the number of stale shares
Detect which GPU crashed the miner more reliably
(ERG+GRAM) Performance regression introduced in 1.16.2

[Admin]

rigel 1.17.0 updated!
- Changelog -
(XEL) Add xelishash algorithm (dev fee 3%), including +ZIL
Only stratum mode is supported https://github.com/vipor-net/xelis-stratum-protocol
Supported pools as of now: Vipor.net (pre-production pool.vipor.io:5077), K1Pool (port 9351), BaikalMine (port 9030)

[Admin]

rigel 1.17.1 updated!
- Changelog -
(XEL) Add experimental solo mining support (solo+tcp://...)
(XEL) Performance / efficiency improvements
Tip: locking GPU memory to 5000mhz doesn't always work well on this version. Some cards perform better with a memory offset instead.
Fix: (UI) Miner uptime is not always reported in the log

[Admin]

rigel 1.17.2 updated!
- Changelog -
(XEL) Performance / efficiency improvements (~10%)